MTAG-HTA 1000V 1-pole voltage detector

TO BE USED FOR VOLTAGES max 1000 V 16 2/3 Hz

The voltage tester is intended to be used against, for example, the railway’s train heating elements.

MTAG-HTA must only be used with orange top part.

Voltage range AC 1000 V

Frequency range: 16 2/3 Hz

For indoor and outdoor environments

Group: 3 = indicates voltage active with signal. Standby mode.

Climate class: N = – 25ºC to + 55ºC depending on battery type.

Self-test: Checks circuit board and battery voltage.

Indications for use (after self-test):

Only high-intensity GREEN light => indicates absence of operating voltage.

Flashing high-intensity RED light and acoustic signal => indicates operating voltage.

Additional indications:

Flashing ORANGE LED after self-test = replace battery. If the error persists, return the tester to the supplier.

RED LED lights up steadily after self-test = return the tester to the supplier!

Bar mount: Universal type (Sunrise)

Polycarbonate casing in yellow/orange

Battery type: 9 V alkaline – IEC 6LR61

Dimensions: Ø 59 mm. L = 280 mm without electrode

Net weight: 0.390 kg